A simpler, non iterative solution exists.
For each kmol/s methane, you already know you need 0.56 kmol/s oxygen. You can measure the methane flow rate in the methane feed, and calculate directly the required oxygen flow using an information calculator. And put this number into the flow constraint.
Statistics: Posted by jasper — 04 April 2018, 05:34
]]>
]]>
3] Controller is given a set point to adjust above to say zero
4] Output from controller (another information stream) sends this information to a control element (flow constriction in feed) to meet set point
Statistics: Posted by ioncube — 03 April 2018, 14:33
]]>
]]>
Statistics: Posted by ioncube — 02 April 2018, 20:08
]]>
]]>
]]>