How to calculate LHV

Moderator: jasper

How to calculate LHV

Postby King » 06 April 2017, 08:15

How to get or calculate the idea Low Heat value(LHV) in matlab unit?
King
 
Posts: 22
Joined: 17 February 2017, 06:22

Re: How to calculate LHV

Postby jasper » 06 April 2017, 08:31

Difficult. There is no CAPE-OPEN defined heat of combustion constant or property.

What you can do is obtain the chemical formula, parse it, deduce what the combustion products are and map the heats of formation for the combustion products in your unit. If you can obtain the heat of formation for your compounds, you can then get to the heat of combustion for each of the pure compounds via this route. Then correct for the state that the mixture is in and the enthalpy of mixing by using enthalpy calculations.

I am not convinced this will necessarily give you accurate numbers - but this will surely give you ballpark numbers.
User avatar
jasper
 
Posts: 1128
Joined: 24 October 2012, 15:33
Location: Spain

Re: How to calculate LHV

Postby jasper » 06 April 2017, 08:34

This is what COCO's HeatOfCombustion unit does, by the way...

http://cocosimulator.org/index_help.php?page=COUS/heatofcombustionunit.htm

It requires manual entries of heats of combustion for each compound, unless the compounds are in a database that contains the heats of combustion (PCD file).
User avatar
jasper
 
Posts: 1128
Joined: 24 October 2012, 15:33
Location: Spain


Return to MATLAB Unit Operation (AmsterCHEM)

Who is online

Users browsing this forum: No registered users and 0 guests

cron