by nrgeng » 18 May 2020, 15:33
Thanks for checking on my issue. Sorry that you were not able to reproduce it.
I hope that you believe the issue occurs. The COFE Log shows another 'Solved finished' entry and the Window shows an advance of 2 min of time in the Tray.
This issue has been known to me from past work so I was not surprised to encounter it again. I chose to report it this time. This simulation has been recently created so the issue is not particular to it. If we can discount any problem with the operating system, Windows 10 Pro v1909, then the issue exists within COCO unless it is a hardware problem. I just reproduced the issue again today, two days later. Also, the issue was reproduced on my other computer a Core i7 with COFE 3.3.0.18. The issue occurs on every Study attempt for me on both computers.
My procedure was to develop a solved simulation then configure the Parametric Study as the visual evidence shows. I added the three input parameters of interest and the two output parameters in the dialogs. I then clicked OK and the data were displayed on the screen and eventually, all of the runs displayed an OK Status meaning the Study was completed. Then I opened the dialog to change the last parameter's, Hydrogen flow, conditions, and discovered that it had disappeared.
Hope this helps. What other details do you need?