residence time

Discusses use of COCO, the process simulation and modelling software suite from AmsterCHEM, downloadable from www.cocosimulator.org

Moderator: jasper

residence time

Postby aken » 03 January 2019, 23:41

hi,
is there a way l can find residence time on a PFR?


regards
Akan
Attachments
RESIDENCETIMEPFR.fsd
(28.85 KiB) Downloaded 18 times
aken
 
Posts: 31
Joined: 18 December 2018, 06:02

Re: residence time

Postby jasper » 07 January 2019, 09:39

You can expose the length and diameter from the reactor using a virtual information port. You can expose the volumetric or mass flow rate from the feed stream from a measure unit. You can then calculate the residence time from an information calculator.
User avatar
jasper
 
Posts: 883
Joined: 24 October 2012, 15:33
Location: Spain

Re: residence time

Postby aken » 29 January 2019, 05:35

for someone with same question, here is the solution and the link to the pdf where the problem was obtained. the answer, t, is in seconds converted to minutes one gets 10.2 minutes same as aspen's. https://lms.nchu.edu.tw/mobile/media/41080
Attachments
RESIDENCETIMEPFR.fsd
(37.31 KiB) Downloaded 7 times
aken
 
Posts: 31
Joined: 18 December 2018, 06:02


Return to COCO

Who is online

Users browsing this forum: No registered users and 1 guest

cron